How to Replace a Saab 9-3 Key The Saab 9-3 has a great variety of appeal to drivers. It is well-lit and has an impressive performance engine. It also has an excellent safety rating. It is nevertheless important to ensure that you have at minimum two working keys for your vehicle. It can be expensive to replace a key if you lose it. How to replace the ignition Key on a Saab 9-3 If your car's keys won't engage in the ignition and you want to replace it, you'll need to replace it. This guide will walk you through how to do it on a Saab 9-3. You'll need a new key with a reprogrammable battery, and a new key-fob case. The majority of modern Saab models make use of a transponder instead of a traditional key to unlock the vehicle and allow it to start. The reprogrammable batteries inside the key-fob will eventually wear out, and they will not be able to hold charge. This is particularly relevant if you continue to use the same key for the same lock. A professional locksmith can change the battery quickly. If you have the proper tools and patience, you can do it yourself. The first step is to remove the key-fob. This is done by inserting a flathead screwdriver in the slot located in the middle of the case. The plastic is thin, and it is susceptible to being damaged. Once the case is open and you are able to prepare the new key by combining the lower part of the old key and the transponder and banana on the new key. This will ensure the new key is properly paired to your CIM, which can make a big difference when replacing the sole key of your Saab 9-3. How do I replace the ignition Key on a Saab 900 If you don't have two keys, you'll have to remove the steering wheel and dashboard for access to the ignition. Start by disconnecting your negative battery cable. After the battery has been disconnected, you can remove the trim and dashboard pieces that surround the steering wheel. After the dashboard is removed, you can insert a screwdriver through the opening behind the ignition switch and remove it. The ignition cylinder is equipped with the key lock, which could stop the car from starting if the key isn't there. If the ignition switch on your 900 isn't working properly, check whether the key is in the lock or snared in the barrel of ignition. It is also recommended to rotate your keys and keep them clean to prevent breaking. Saab cars are different from other cars in that they don't utilize traditional keys made of metal. Instead, the car recognizes electrical signals that come from the key fob by using the use of a specific microchip. If you only lose one key fob that is working, your dealer will charge an additional fee to replace your computer module (also called the CIM). We can reprogram the EEPROM of your current computer to make it accept new keys, without the need for replacement. This can save you more than 50% of what the dealer charges! This is the SAAB Key PROGRAM. Find out more about it here! How to replace saab ignition key replacement in a Saab9-5 The metal component of classic Saab keys is simple to duplicate and doesn't pose a significant threat to vehicle theft. The real security comes from the electronic part of the key-fob, which is equipped with a chip that can recognize your vehicle when it is inserted into the ignition switch. Saab has relied on the technology of this anti-theft device for over a decade. It's not as efficient as a door lock however, it makes the theft of your car a lot harder. Every Saab owner must keep a spare Saab key in their vehicle. The majority of new Saabs come with two keys right from the factory, but you can buy more keys from a dealer through a special handheld computer referred to as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception is the NG 9-3 cars, which have modern, more advanced features that require a different key-fob and operate using a different procedure. The dealer will replace the CIM or TWICE module of those cars if the keys are lost, and charge you top dollar for doing it. But we can reprogram the EEPROM on your computer to accept new keys without replacing the expensive modules. How do I replace the ignition Key on an XC90 Saab If your SAAB 9-3 key fob begins having trouble turning the barrel of the lock it's possible that it's time to replace it. The process is simple and you don't have to go to a dealership. Instead, you can do it yourself at home using a few simple tools. It is first necessary to prepare the new keys. Before starting, make sure that the anti-theft device is disabled by placing blocks on your rear wheels and releasing the handbrake. Insert the key in the ignition, and then turn it to the on position. This will activate the accessories however, it won't start the engine. Repeat this process five times, then leave the key in the on position. Next, you'll need to buy a new case for your key fob. You can find these at any auto parts store and they're typically quite affordable. You can get them without electronics based on the model. To open up the case, place an flathead screwdriver into the slot located in the middle and gently work it. The case should split easily, and when you have it, you'll be able to gain access to the internal electronics. Use a flathead screwdriver, which will gently pry open the electronics.
saab ignition key replacement
